JMatPro boasts a very impressive lists of properties which can be calculated:

A table summarising the available JMatPro calculation types per material type is available for download.

• Stable and metastable phase equilibria calculations
  • Temperature stepping calculations
  • Concentration stepping calculations
  • Metastable phase calculations
• Solidification calculations
  • Solification calculation based on a modified Scheil-Gulliver model to include fast C and N diffusion in steels and solid-state transformations.
  • Thermo-physical and physical properties during solidification (enthalpy, specific heat, latent heat, density, thermal expansion, volume change, thermal conductivity, electrical conductivity and resistivity, liquid viscosity, liquid diffusivity, Poisson's ratio, Young's/Bulk/Shear moduli). When relevant these properties are given per phases.
  • Cooling curves calculation
  • Cast Iron strength
  • Aluminium alloys cast strength and secondary dendrite arm spacing
• Mechanical properties
  • 0.2% Proof stress, tensile stress and hardness
  • proof stress, tensile stress and hardness inter-conversion utility
  • stress-strain curves
  • creep
  • Aluminium and Cast Iron strength
• Thermo-physical and physical properties
  (These properties are calculated for the whole temperature range including in the liquid phase When relevant they are given per phases)
  • specific heat
  • enthalpy
  • density
  • thermal expansion coefficient
  • linear expansion
  • thermal conductivity
  • electrical conductivity/resistivity
  • liquid viscosity/diffusivity
  • Poisson's ratio
  • Young's/Bulk/Shear moduli
  • Surface tension
  • Gamma/Gamma' mismatch
• Phase transformations
  • TTT curves
  • CCT curves
  • Simultaneous carbide precipitation in steels
  • Isothermal transformations
  • Gamma'/Gamma" coarsening in Ni alloys
  • Martensite transition
  • Deformation martensite
• Ni heat treatment calculations
  • Microstructure calculations
  • Strength calculation
• Quench and welding properties of steels
  • Phases formed vs. cooling rate
  • Physical and mechanical properties vs. cooling rate
• Data export to casting, forging, heat treatment... simulation packages
• Carburisation calulations
• Pitting resistance in stainless steels